Skip to content
Home » News » Common problems and solutions of precision leveling machine

Common problems and solutions of precision leveling machine

  • JIUZH 

Precision leveling machine will have some problems for a long time, if there are some small problems that can be solved by themselves, you can maintain it very quickly and put it into production, without affecting your own production effect, it is not better, according to years of experience to summarize the following several common faults and solutions, let us learn to learn.

  1. Reason: The power supply is not available Solution: Re-check the power supply to ensure that the power supply voltage is consistent with the rated voltage of the machine. Usual maintenance: regularly check whether the wires are aged and need to be replaced, check whether the terminals are falling off, and clean the dust in the electrical box.
  2. Reason: Inverter alarm Solution: Refer to the inverter manual for adjustment, and seriously contact the manufacturer for maintenance and replacement. Usual maintenance: check whether the terminals of the inverter are loose and clean the dust on the surface of the inverter.
  3. Reason: There is a material stuck in the drum that cannot be rotated Solution: Loosen the adjustment handwheel to take out the material Note: The material can not be pressed too tightly during adjustment, and the material beyond the leveling range of the machine is forbidden to be leveled in this machine.
  4. Reason: Sprockets or gears have slippage Solution: Re-fix the sprocket gears, if the wear is serious, please contact the manufacturer to replace Usual maintenance: check whether there is lubricating oil on the surface of sprockets, chains, gears and other surfaces every week, and clean the surface in time with lubricating oil.
  5. Reason: motor or reducer failure Solution: Repair or replace the motor reducer Usual maintenance: check whether the motor has abnormal sound every month, whether it is hot, check whether the lubricating oil of the reducer is enough, and the oil needs to be replaced once a year.
  6. Reason: the switch is damaged, or the wire falls off Solution: replace the switch and rewire the usual maintenance: often pay attention to whether the switch button is abnormal, check whether the wire in the electrical box is burned or fall off every quarter, and repair and replace it in time.

Leave a Reply

Your email address will not be published. Required fields are marked *

EN
× How can I help you?