Skip to content
Home » News » Learn more about sheet leveling machines

Learn more about sheet leveling machines

  • JIUZH 

I believe that everyone is the same for the proofreading machine, is a process means, how to give the metal plate leveling.
School material plate leveling is in the staggered arrangement of the upper and lower rows of work rollers between the other time, one of the stalls work of the empty plate to form a staggered arrangement of the upper and lower rows of work rollers between the school rules, the lower material between the time when the plate quasi-access to the use of the “Square Tune”, the original form of the work of the plate is adjusted to change the curvature to different curvature, and ultimately in a different way! The way of running, and finally in a different way task, and to finalize the assignment of consistent execution.
Leveling machine work of work: roller type school leveling machine can be divided into the upper roller type, roller type school type and roller type single-row type: upper roller type single-type plate: upper roller type roller row type single-row type work column type non-parallel type improved type can not work number, stranded type of school leveling structure can be divided into a four-layer structure. Four-type, four-type calibrator leveling machine type plate type hydraulic plate connecting shaft type and mechanical type. According to the form of sub-drive can be divided into ten thousand type, roller main drive and the upper and lower rows of work roller driven leveling machine.

Commonly used plate leveling machine features:

  1. calibrate the upper row of work rollers to adjust: calibrate the upper row of work rollers for each job, generally not calibrate the upper row of work rollers for each job, therefore, the size of the work and support the range is the main calibration work rollers, can be convenient to calibrate the clearance of the rollers, the lower row of rollers of the workspace of the work of the calibration table needs to be accurately adjusted according to the size of the calibrated table and the work of the work of the rough. Or online use;
  2. School leveling on the upper and lower rows of work row into two schools, the upper row of work rollers (roller columns parallel to the presentation of the machine), can be moved up and down the school leveling rollers on the upper and lower rollers have a certain direction, can be on the upper and lower rollers bias work lifting platform under the cylinder table, at the same time, relative to the roller can be used for the direction of the current rollers, but can be used for the direction of the current rollers have the direction of the school’s school table can be used for the leveling of the cylinder mainly have the direction of the school’s plane of the most of cylinder leveling machine.
    School leveling machine uses a combination of different rollers arranged according to the different thickness of the school flat plate, by adjusting the rollers under the pressure and the flat plate work mode, so that different work rollers involved in the school leveling. This calibration material of flat material rolling and proof rolls and elastic deformation of the special purpose especially for reasonable piece, fire saw work rolls after calibration calibration calibration effect requires 0.1mm / m of rolling high.
    In recent years, with the development of leveling machine technology, the emergence of an improved roll column without column plate leveling machine, variable roll distance material leveling machine. Foreign countries can also adjust the leveling machine work elastic deformation of the hydraulic leveling machine machine improved machine leveling machine due to the machine’s roll columns are not parallel to its sheet material, while the work plate size can move a small working distance, its upward improvement of the conditions of the lower mold.

Leave a Reply

Your email address will not be published. Required fields are marked *

EN
× How can I help you?